SCREEN & OFFSET

A double-coated pressure sensitive 1.0 mil clear polyester film with permanent adhesive on one side and removable adhesive on the opposite side. GF 113 is self-wound on a 1.25 mil clear polyester liner printed with “Remove to Expose Adhesive” to identify the removable adhesive. This clear liner allows the graphics to be viewed after application of the 113 mounting adhesive. This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The permanent adhesive is exposed when the product is unwound leaving the removable adhesive protected by the liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

A double-coated pressure sensitive 1.0 mil clear polyester film with a permanent adhesive on one side and removable adhesive on the opposite side. It is self-wound on a white 76# paper liner. Designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The permanent adhesive is exposed when the product is unwound leaving the removable adhesive protected by the liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

A double-coated pressure sensitive 1.0 mil clear polyester film with a high-tack permanent adhesive on one side and a high-tack removable adhesive on the opposite side. The 4.5 mil clear air-egress PET liner is printed with “Remove to Expose Adhesive” on the removable adhesive side. The air -gress liner assures smooth bubble-free application (NOTE: Air-Egress adhesives are DRY APPLY ONLY). The clear liner allows the graphics to be viewed after lamination. This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The high-tack permanent (HTAP) adhesive is protected by a 1.5 mil clear polyester liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

A double-coated pressure sensitive 1.0 mil clear polyester film with a permanent adhesive on one side and a removable adhesive on the other side. The two-liner construction has a 1.2 mil clear polyester liner printed on one side with “Remove to Expose Adhesive” to identify the removable adhesive and allows the graphics to be viewed after lamination. The other side has a 1.5 mil clear polyester liner for added clarity and wet out (permanent adhesive side). This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The clear mounting film can be laminated by a cold laminating process without the addition of heat.

A 3.2 mil matte white calendared vinyl film coated with adhesive on both sides. One side is coated with
permanent acrylic pressure sensitive adhesive for laminating to printed counter mats. The low-tack removable adhesive is formulated to provide attachment of the mat to commercial counters and cleanly remove when the promotion is concluded. This product is designed to produce counter mats that cleanly remove from commercial surfaces such as Formica, metal and glass.

A 2.0 mil print-treated metallized polyester film with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. These films are designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use. Designed for general purpose printing of nameplates, decals, product identification markings and labels. For use on smooth flat surfaces.

A 2.0 mil print-treated metallized polyester film with permanent acrylic pressure sensitive adhesive on a 90#
layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested piror to use. Designed for general purpose printing of nameplates, decals, product identification markings and labels. For use on smooth flat surfaces.

A 1.0 mil clear gloss polyester film coated with permanent acrylic pressure sensitive adhesive on a 53# paper overlaminating liner. Designed for general purpose overlaminating film for decals or nameplates for protecting the underlying graphics.

A 2.0 mil clear polyester film coated with permanent acrylic pressure sensitive adhesive on a 2.0 mil
polypropylene liner. Designed for general purpose overlaminating film for decals or nameplates for protecting the underlying graphics.

A 1.0 mil clear polyester film with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use. Designed for general purpose printing of nameplates, decals, product identification markings and labels on metal, glass, painted metal and some plastics. Recommended for smooth flat substrates.

A 2.0 mil clear polyester film coated with permanent acrylic pressure sensitive adhesive on a 1.2 mil polyester liner. Designed for general purpose overlaminating film for decals or nameplates for protecting the underlying graphics.

A 2.0 mil clear polyester film with permanent acrylic pressure sensitive adhesive on a 90# layflat
liner. This film is designed to accept a variety of UV curable and solvent based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use. Designed for general purpose printing of nameplates, decals, product identification markings and labels on metal, glass, painted metal and some plastics. Recommended for smooth flat substrates.

A 2.0-mil clear print-treated polyester film coated with high tack permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. This product is designed for permanent decals and nameplates requiring adhesion to a variety of substrates ranging from clean metal, painted metal, glass, styrene and low surface energy plastics such as polypropylene and polyethylene. May also be applicable to certain powder coated metal finishes.

A 6.0 mil clear flexible polished calendered vinyl film with a slight texture designed for use as the protective overlay for Traffic Graffic® decals. Adhesive is a pressure sensitive permanent acrylic formulated for exceptional clarity. This product is intended for use as the overlaminating film to produce Traffic Graffic® floor decals. The adhesive is formulated to adhere to most common printing inks. However, specific formulations must be tested before use. Some inks may contain excessive flow additives that could reduce adhesion of this product.

A 2.0 mil print-treated metallized polyester film coated with permanent acrylic pressure sensitive
adhesive on a 90# layflat liner. This film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to production. Designed for permanent decorative decals, product identification markings, point
of purchase decals, and consumer information labels. Recommended for use on flat
smooth substrates.